Skip to main content

reComputer RK Module FAQ

This page contains verified answers for the reComputer RK Module. Each answer states the product variant and firmware mode it applies to, together with the date it was last verified against current official sources.

Before you begin​

  • Confirm the exact product variant and the SoC it is based on (RK3588 or RK3576).
  • Check the current firmware version before applying version-specific steps.
  • Answers on this page were last verified on 2026-11-01; re-check the linked official sources if you are reading this later.

Documentation & Usage​

Are the mechanical drawing, the B2B pin definition and the KiCad footprint available for the reComputer RK3576 Module?​

Applies to: reComputer RK3576 Module and its dev kit, for carrier-board and footprint design

Last verified: 2026-11-01

Not at the moment. The only open resource currently published for the reComputer RK3576 Module is the schematic on Bazaar: https://files.seeedstudio.com/wiki/reComputer_RK/Documents/recomputer_rk3576_module/reComputer_RK3576_Module_v1.0_260821_sch.pdf .

Notes:

  • If you need a customized version of the device, please contact the Seeed team about the customization service

References:

Tech Support & Product Discussion​

Thank you for choosing our products! We are here to provide you with different support to ensure that your experience with our products is as smooth as possible. We offer several communication channels to cater to different preferences and needs.

Loading Comments...